Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
12.1. Specifications
12.2. Coupling - general information
12.3. A coupling pedal - removal, installation and adjustment
12.4. The main cylinder of coupling - removal, dismantling and installation
12.5. The working cylinder of coupling - removal, dismantling and installation
12.6. The damping cylinder of coupling - removal, dismantling and installation
12.7. A coupling hydraulic actuator - removal
12.8. Coupling mechanism details - removal, dismantling and installation
12.9. The release bearing - replacement
12:10. The directing plug of a main shaft of the check point - replacement
12:11. The driveshaft, a reducer and the back bridge - general information
12:12. Cardan
12:13. An average support - replacement
12:14. Cardan hinges - replacement
12:15. A half shaft, the back wheel bearing and an epiploon - removal and installation.
12:16. A reducer of the back bridge - removal and installation
12:17. An epiploon of the leading gear wheel of a reducer - replacement
12:18. Zadny Bridge - removal and installation
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment
 





12-5-rabochijj-cilindr-scepleniya-snyatie-razborka-i-ustanovka.html

12.5. The working cylinder of coupling - removal, dismantling and installation

Removal
1. Wrap a cover from a tank on a polyethylene film to prevent big losses of liquid at a hose detachment.
2. Release a nut of fastening of a tube of a hydraulic actuator to an arm.
4.5 Рабочий цилиндр смонтирован на картере сцепления с правой стороны
4.5 The working cylinder is mounted on a coupling case on the right side


3. Get a spring bracket and remove a hose.
4. Disconnect a hydraulic actuator hose from the cylinder.
5. Turn off two bolts and remove the cylinder
Dismantling
6. Remove a dustproof cover and get a pusher. Slightly knock with the cylinder on a wooden surface to take a spring and the piston (photo).

4.6 Детали рабочего цилиндра сцепления 1.  Толкатель  8. Пылезащитный чехол  3. Пружина  4. Манжета поршня 5. Поршень 6. Цилиндр 7. Штуцер для прокачки
4.6 Details of the working cylinder of coupling 1. Pusher 8. Dustproof cover 3. Spring 4. Piston 5 cuff. Piston 6. Cylinder 7. The union for pumping


7. Turn out the union for pumping.
8. Check a condition of an internal surface of the cylinder. At detection of zadir, scratches or the painted sites replace the cylinder.

5.1 Демпферный цилиндр укреплен на перегородке моторного отсека двумя винтами
5.1 The damping cylinder is strengthened on a partition of a motor compartment by two screws


5.3 Детали демпфирующего цилиндра 1.  Крышка 2. Прокладка 3. Цилиндр 4. Штуцер для прокачки 5. Внутренняя поверхность цилиндра  6. Пружина 7. Манжета 8. Поршень 9. Упорная поверхность демпфера 10. Резиновый демпфер
5.3 Details of the damping cylinder 1. Cover 2. Laying 3. Cylinder 4. The union for pumping 5. Internal surface of the cylinder 6. Spring 7. Cuff 8. Piston 9. Persistent surface of a damper 10. Rubber damper


4.9 Правильная ориентация поршня, цилиндра и манжеты при сборке
4.9 The correct orientation of the piston, cylinder and cuff at assembly


9. If cylinder details in good shape, wash out them pure brake fluid and replace a sealant (are available on sale as a part of a remkomplekt). Dress a cuff on the piston, having tracked correctness of its orientation (photo).
10. Before assembly dip details into brake fluid.
11. Collect the cylinder, having established all details in a former order.
Installation
12. Install the cylinder upside-down. Remove air from a hydraulic actuator.

"previous page
12.4. The main cylinder of coupling - removal, dismantling and installation
following page"
12.6. The damping cylinder of coupling - removal, dismantling and installation




9ac83ee2