Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
15.1. Specifications
15.2. General information
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. The torsion - removal and installation
15.7. Bars and extensions of a suspension bracket - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The lower lever and a spherical support - removal and installation
15:10. Springs of a back suspension bracket - removal and installation
15:11. Bars of a back suspension bracket - removal and
15:12. The stabilizer of a back suspension bracket - removal and installation
15:13. Steering - general information
15:14. A wheel - removal and installation
15:15. The lock of a steering column - removal and installation
15:16. A steering reducer - removal and installation
15:17. A steering reducer (the car without hydraulic booster) - dismantling
15:18. Steering
15:19. The pump hydraulic boosters - removal and installation
15:20. Removal of air from a wheel hydraulic actuator
15:21. Steering drafts - removal and installation
15:22. The angles of installation of forward wheels - general information
15:23. Wheels and tires - general information
16. Body and elements of finishing
17. System of electric equipment
 






9ac83ee2

15-15-zamok-rulevojj-kolonki-snyatie-i-ustanovka.html

15:15. The lock of a steering column - removal and installation

1. Prepare srezny screws of fastening of the lock (get only in Nissan car service).
2. Remove a wheel.
3. Remove a casing of a steering column.
4. Accurately drill two srezny screws, having picked up a drill for diameter of a rod part of the screw.

15.1 Для доступа к редуктору надо сиять резиновый фартук
15.1 For access to a reducer it is necessary to shine a rubber apron


15.2 Болт нижнего шарнира (на автомобиле сги дроусилителем)
15.2 A bolt of the lower hinge (on the sga car a drousilitel)


15.3 Снятие сошки с вала редуктора 1.  Корпус редуктора 2. Сошка
15.3 Removal of a bipod from a shaft of a reducer 1. Case of a reducer 2. Bipod


15.5 Болты крепления рулевого редуктора находится внутри швеллера левого лонжерона рамы
15.5 Bolts of fastening of a steering reducer is in a channel of the left longeron of a frame


5. Unscrew two additional screws and remove the lock. Disconnect wires.
6. At installation combine openings and wrap screws. Check, having inserted a key, operation of the lock and tighten screws.
7. Tighten srezny screws to an oblamyvaniye of heads (photo).
8. Other assembly is carried out upside-down.


"previous page
15:14. A wheel - removal and installation
following page"
15:16. A steering reducer - removal and installation