Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
15.1. Specifications
15.2. General information
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. The torsion - removal and installation
15.7. Bars and extensions of a suspension bracket - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The lower lever and a spherical support - removal and installation
15:10. Springs of a back suspension bracket - removal and installation
15:11. Bars of a back suspension bracket - removal and
15:12. The stabilizer of a back suspension bracket - removal and installation
15:13. Steering - general information
15:14. A wheel - removal and installation
15:15. The lock of a steering column - removal and installation
15:16. A steering reducer - removal and installation
15:17. A steering reducer (the car without hydraulic booster) - dismantling
15:18. Steering
15:19. The pump hydraulic boosters - removal and installation
15:20. Removal of air from a wheel hydraulic actuator
15:21. Steering drafts - removal and installation
15:22. The angles of installation of forward wheels - general information
15:23. Wheels and tires - general information
16. Body and elements of finishing
17. System of electric equipment
 






9ac83ee2

15-16-rulevojj-reduktor-snyatie-i-ustanovka.html

15:16. A steering reducer - removal and installation

1. Remove the left forward wheel. For access to a reducer get a rubber apron from a motor compartment (photo).
2. Turn off a bolt of fastening of the hinge to a reducer (photo).
3. Turn off a nut of a bipod and remove a bipod (photo).
4. On cars with the power steering turn off and muffle the union of tubes and merge liquid from a hydraulic actuator.
5. Turn off bolts and remove a reducer (photo).

16.2 Детали рулевого редуктора1,10. Контргайка2,6 Сальник3.Регулировочная гайка4. Шариковая гайка  и  ведущий вал редуктора5.  Пружинная шайба7. Корпус8. Вал сошки9.  Регулировочный винт11. Пробка12. Крышка13. Прокладка14. Регу
16.2 Details of a steering reducer
1,10. Lock-nut 
2,6 Epiploon 
3. Adjusting nut 
4. Ball nut and leading shaft of a reducer
5. Spring washer
7. Case
8. Bipod shaft
9. Adjusting screw 
11. Stopper
12. Cover
13. Laying
14. Regu


16.5 Отворачивание регулировочной гайки редуктора
16.5 Otvorachivany adjusting nut of a reducer


6. Installation is carried out and the return order. Before a wraparound of a bolt of the lower hinge expose wheels in the provision of driving on a straight line, check the provision of a steering wheel. The flute on a shaft has to be combined with an opening under a bolt in the elastic coupling. Tighten all bolts with the set moment. At installation of a bipod check coincidence of shlits of a bipod and shaft. Tighten a nut with the set moment. On cars with the hydraulic booster fill in liquid and remove air.


"previous page
15:15. The lock of a steering column - removal and installation
following page"
15:17. A steering reducer (the car without hydraulic booster) - dismantling