Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
15.1. Specifications
15.2. General information
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. The torsion - removal and installation
15.7. Bars and extensions of a suspension bracket - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The lower lever and a spherical support - removal and installation
15:10. Springs of a back suspension bracket - removal and installation
15:11. Bars of a back suspension bracket - removal and
15:12. The stabilizer of a back suspension bracket - removal and installation
15:13. Steering - general information
15:14. A wheel - removal and installation
15:15. The lock of a steering column - removal and installation
15:16. A steering reducer - removal and installation
15:17. A steering reducer (the car without hydraulic booster) - dismantling
15:18. Steering
15:19. The pump hydraulic boosters - removal and installation
15:20. Removal of air from a wheel hydraulic actuator
15:21. Steering drafts - removal and installation
15:22. The angles of installation of forward wheels - general information
15:23. Wheels and tires - general information
16. Body and elements of finishing
17. System of electric equipment
 





15-18-rulevoe-upravlenie.html

15:18. Steering

1. Leaving consists in periodic check of a tension of a belt of the pump, liquid level in a tank and conditions of tubes and hoses.
2. In case of abnormal work of steering the car should be handed over in car service for check of pressure in system and a tightness in bearings of a steering reducer.
3. If at these checks it becomes clear that the pump or the steering mechanism are faulty, then the hydraulic booster it is necessary to replace (to repair is not subject).
4. At detection of a leak in epiploons it is necessary to replace epiploons, but at obligatory check of the hydraulic booster in car service.

20.1  Рулевые тяги 1 . Внутренний наконечник 2. Наружный наконечник 3. Маятниковый рычаг 4. Регулировочный хомут 5. Поперечная тяга
20.1 Steering drafts 1. Internal tip 2. External tip 3. Pendular lever 4. Adjusting collar 5. Cross draft


5. For adjustment of a belt of the pump turn off a lock-nut of a roller of a natyazhitel and rotate an adjusting bolt (Gl.1).
6. All details of steering with the hydraulic booster except the pump, hoses and a hydraulic part same, as steering details without hydraulic booster.


"previous page
15:17. A steering reducer (the car without hydraulic booster) - dismantling
following page"
15:19. The pump hydraulic boosters - removal and installation




9ac83ee2