Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
15.1. Specifications
15.2. General information
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. The torsion - removal and installation
15.7. Bars and extensions of a suspension bracket - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The lower lever and a spherical support - removal and installation
15:10. Springs of a back suspension bracket - removal and installation
15:11. Bars of a back suspension bracket - removal and
15:12. The stabilizer of a back suspension bracket - removal and installation
15:13. Steering - general information
15:14. A wheel - removal and installation
15:15. The lock of a steering column - removal and installation
15:16. A steering reducer - removal and installation
15:17. A steering reducer (the car without hydraulic booster) - dismantling
15:18. Steering
15:19. The pump hydraulic boosters - removal and installation
15:20. Removal of air from a wheel hydraulic actuator
15:21. Steering drafts - removal and installation
15:22. The angles of installation of forward wheels - general information
15:23. Wheels and tires - general information
16. Body and elements of finishing
17. System of electric equipment
 






9ac83ee2

15-19-nasos-gidrousiliteli-snyatie-i-ustanovka.html

15:19. The pump hydraulic boosters - removal and installation

1. The pump and a tank change in common.
2. Turn off a lock-nut of a roller of a natyazhitel of a belt and weaken a belt, having turned a bolt counterclockwise, take off a belt
3. Weaken, but do not disconnect hoses from the pump.
4. Raise the pump with a tank, substitute the pallet, finally disconnect hoses and merge liquid. Muffle hoses.
5. If necessary remove a pulley a standard stripper.
6. Installation is carried out upside-down. Before an inhaling of bolts adjust a belt tension. Fill a tank with liquid and remove air.


"previous page
15:18. Steering
following page"
15:20. Removal of air from a wheel hydraulic actuator