Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of the cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Lubricant of a running gear and steering
2.16. Check of a suspension bracket and steering
2.17. Check of the driveshaft
2.18. Check of the exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in the manual transmission
2.21. Check of level of oil in the transfer case
2.22. Check of level of oil and karteredifferentsiat (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ejector valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Replacement of oil in the transfer case
2.36. Replacement of oil in the manual transmission
2.37. Replacement of oil in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Replacement of lubricant in naves of forward wheels and check of bearings (only for rear wheel drive cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and the runner of a rotor - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment
 






9ac83ee2

2-15-smazka-khodovojj-chasti-i-rulevogo-upravleniya.html

2.15. Lubricant of a running gear and steering

1. Accessories to lubricant are shown on a photo. 15.1 Accessories to lubricant
2. To lubricant of a running gear and steering it is applied universal lithium lubricants  to Lubricant spherical support of levers of a forward suspension bracket, tips of steering drafts, forward and reverse cardan gear are subject (on cars With a wheel formula 4x4).
3. The place of lubricant of the top support is in the top part of the case of a support (photo), for lubricant it is necessary to remove a wheel. Access to a butterdish of the lower support is provided through an opening in the lever (photo). An opening for lubricant tips of steering drafts turn out a cap (photo). On cardan transfer hinges and the shlitsevy sliding connection (photo) are greased.
4. Lift the car and establish on supports.
5. Turn out caps and screw butterdishes (on a part of cars).
6. Squeeze out a little lubricant from the syringe and wipe absolutely.

15.3а Резьбовое отверстие под масленку для смазки верхней опоры заглушено пробкой
15:3á The Carving opening under a butterdish for lubricant of the top support is muffled by a stopper


15.3в Заглушка отверстия под масленку в наконечнике тяги
15:3ó An opening Cap under a butterdish in a draft tip


7. Grease with the syringe all connections. Spherical support to a shpritsuyta until lubricant does not fill rubber covers (it is felt on pressing). If lubricant it vykho-is put from a butterdish, then tighten a butterdish or turn out and check purity of the valve of a butterdish.
8. Remove the lubricant remains.
15.3г   Заглушка отверстия под масленку на карданном шарнире
15:3ú  An opening Cap under a butterdish on the cardan hinge


15.3б Отверстие в рычаге для смазки нижней опоры (на а/м ранних выпусков)
15:3í The Opening in the lever for lubricant of the lower support (on the car of early releases)


15.Зг Масленка шлицевого соединения
15. Зг Butterdish of shlitsevy connection


9. Grease a cable and levers of the emergency brake.
10. Lower the car.
11. Grease the rubbing details of locks of a cowl and a back door, grease the terminations of cables.
12. Grease loops of doors with several drops of oil for the engine.
13.  Cylindrical  switches  of locks  of doors are greased with aerosol graphite lubricant.

"previous page
2.14. Check and adjustment of gaps of valves
following page"
2.16. Check of a suspension bracket and steering