Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of the cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Lubricant of a running gear and steering
2.16. Check of a suspension bracket and steering
2.17. Check of the driveshaft
2.18. Check of the exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in the manual transmission
2.21. Check of level of oil in the transfer case
2.22. Check of level of oil and karteredifferentsiat (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ejector valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Replacement of oil in the transfer case
2.36. Replacement of oil in the manual transmission
2.37. Replacement of oil in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Replacement of lubricant in naves of forward wheels and check of bearings (only for rear wheel drive cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and the runner of a rotor - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment
 





2-28-proverka-remnejj-bezopasnosti.html

2.28. Check of seat belts

1. Check a condition of belts, buckles and fastenings.
2. Make sure that at the included ignition the lamp reminding of need burns fastened belts.
3. Check operation inertial the mechanism of fixing of belts.
4. At detection of signs abnormal works the belt assembled should be replaced.

27.5а Регулировка натяжения ремней 4-цилиндровых двигателей1. Шкив вентилятора2. Шкив компрессора3. Контргайка4. Регулировка5. Болт6,10. Ослабить7. Роли
27.5a Adjustment of a tension of belts of 4-cylinder engines
1. Fan pulley                 
2. Compressor pulley                
3. Lock-nut                             
4. Adjustment                           
5. Bolt
6,10. To weaken
7. Roles


27.4 Проверка натяжения ремня1. Брусок2. Линейка3. Прогиб ремня4. Линейка должна располагаться перпендикулярно к бруску
27.4 Check of a tension of a belt
1. Whetstone
2. Ruler
3. Belt deflection
4. The ruler has to settle down perpendicularly to whetstone


27.5б Регулировка натяжения ремней на двигателе V61. Шкив компрессора2. Шкив генератора3. Шкив коленвапа4. Шкив гидроусилителя5. Шкив насоса охлаждения
27.5b Adjustment of a tension of belts on the V6 engine
1. Compressor pulley
2. Generator pulley
3. Pulley of a kolenvap
4. Pulley of the hydraulic booster
5. Cooling pump pulley


27.6а Для регулировка натяжения ремня некоторых агрегатов надо отпустить указанный болт,...
27.6a For adjustment of a tension of a belt of some units it is necessary to release the specified bolt...


29.2 Снятие крышки фильтра
29.2 Removal of a cover of the filter


29.4 Снятие фильтра вентиляции картера
29.4 Removal of the filter of ventilation of a case


27.6б ...болт А и вращать болт В (на двигателях V6)
27.6b... a bolt And yes to rotate a bolt In (on V6 engines)


30.6 Топливный фильтр на карбюраторных двигателях с электрическим насосом
30.6 The fuel filter on carburetor engines with the electric pump




"previous page
2.27. Drive belts - check, adjustment and replacement
following page"
2.29. Replacement of the air filter and filter of ventilation of a case




9ac83ee2