Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
4.1. General information
4.2. Types of the repair work performed without dismantle of the engine from the car
4.3. Order of installation of the piston of the 1st cylinder in compression step VMT.
4.4. Covers of heads of cylinders – removed and installation
4.5. The roller with yokes - removal and installation
4.6. Hydropushers - removal and installation
4.7. The soaking-up collector - removal and installation
4.8. A final collector - removal and installation
4.9. A pulley - an uspokoitel - removal and
4.10. A gear belt - removal and installation
4.11. A forward epiploon of the crankshaft - replacement
4.12. A cam-shaft epiploon - replacement
4.13. Heads of cylinders - removal and installation
4.14. A cam-shaft - removal and installation
4.15. Details of the valvate mechanism - check
4.16. The oil pallet - removal and installation
4.17. The oil pump - removal, check and installation
4.18. A back epiploon - replacement
4.19. A flywheel (a drive plate of the hydrotransformer) -
4.20. Engine support - replacement
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment
 





4-14-raspredval-snyatie-i-ustanovka.html

4.14. A cam-shaft - removal and installation

Removal
1. Remove a head of cylinders.

14.4а Удерживая распредвал за углубление...
14:4á Holding a cam-shaft for deepening...


14.5а Извлечение сальника распредвала
14:5á Extraction of an epiploon of a cam-shaft


14.5б Снятие распредвала
14:5í Removal of a cam-shaft


14.6 Проверка осевого люфта распредвала1. Индикатор2. Люфт3. Болт4. Распредвал5. Упорная шайба
14.6 Check of an axial side play of a cam-shaft
1. Indicator
2. Side play
3. Bolt
4. Cam-shaft
5. Persistent washer


14.7 Упорная шайба для регулировки осевого люфта распредвала. Поставляется в запчасти с указанной толщиной (в скобках размер в мм).1.  Метка С2. Без метки3. Кернение4.  К боковой части двигателя
14.7 A persistent washer for adjustment of an axial side play of a cam-shaft. It is delivered in the spare part with the specified thickness (in brackets the size in mm).
1. A tag With
2. Without tag
3. Kerneniye
4. To a side part of the engine


15.1 Поверхность опоры распредвала
15.1 Cam-shaft support surface


15.2 Измерение опорной шейки
15.2 Measurement of a basic neck


15.3 Проверка биения распредвала
15.3 Check of a beating of a cam-shaft


15.4 Проверка износа кулачков распредвала
15.4 Check of wear of cams of a cam-shaft


2. Remove pushers together with the case and rollers with yokes.
3. Remove a face cover (photo).
4. Holding a cam-shaft, turn off the central bolt (photo). Get a bolt and a washer.
5. Carefully get an epiploon and a cam-shaft (photo).
Installation
6. Grease basic necks and establish a cam-shaft. Tighten a bolt and check an axial side play (photo). The side play has to be 0,03-0,06 mm.
7. If the side play exceeds norm, then a persistent washer replace (photo).

15.5 Проверяемые поверхности гидротолкателя
15.5 The checked hydropusher surfaces


15.6а Проверьте диаметр толкателя...
15:6á Check diameter of a pusher...



"previous page
4.13. Heads of cylinders - removal and installation
following page"
4.15. Details of the valvate mechanism - check




9ac83ee2