Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
7.1. Fuel system - general information
7.2. The fuel filter - replacement
7.3. Idling turns - check and adjustment
7.4. The fuel highway - repair
7.5. A cable of the drive of a butterfly valve - removal and installation
7.6. A pedal - removal and installation
7.7. The fuel pump - check
7.8. The fuel pump - removal and installation
7.9. System of electronic injection of fuel - general information
7.10. Units of control and measuring system with the processor ECCS block - general information
7.11. Decompression of fuel system
7.12. The case of a butterfly valve (for systems with preliminary injection of TBI of systems) removal and installation
7.13. Nozzle replacement
7.14. System of injection of fuel – adjustment System of preliminary injection (TBI)
7.15. Fuel system cleaning
7.16. Tank removal and installation
7.17. Fuel level sensor removal and installation
7.18. Tank washing
7.19. Exhaust system general information
7.20. Forward exhaust pipe removal and installation
7.21. Catalytic neytralizatorsnyaty and installation
7.22. Muffler removal and installation
7.23. Average pipe removal and installation
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment
 






9ac83ee2

7-12-korpus-drosselnojj-zaslonki-dlya-sistem-s-predvaritelnym-vpryskom.html

7.12. The case of a butterfly valve (for systems with preliminary injection of TBI of systems) removal and installation

Removal
1. Execute a decompression and disconnect the battery from weight.
2. Merge about 1 l of liquid.
3. Remove the air filter.
4. Disconnect from draft of a butterfly valve a cable of the drive of the gate and a cable круизконтроля (photo).
5. Disconnect hoses of the regulator of pressure and a dilator of bystry idling, turn off 4 nuts and remove the case with laying.

10.22а Расположение агрегатов система впрыска с предварительным приготовлением горючей смеси на   двигателе V6 1. Бак (универсал) 2. Бак (грузовой автомобиль) 3. Сиденье помощника 4. Выхлопная труба 5. Датчик выхлопных газов 6. Бачок с поглотителем 7.  Кл
10.22a the Arrangement of units system of injection with preliminary preparation of gas mixture on  the V6 1 engine. Tank (station wagon) 2. Tank (truck) 3. Seat of the assistant 4. Exhaust pipe 5. Sensor of exhaust gases 6. A tank with an absorber 7. C


10.22б Расположение агрегатов система впрыска с предварительным приготовлением горючей смеси  на  4цилиндровом двигателе 1 .  Сиденье помощника 2. Аварийное реле 3. Детали системы впрыска
10.22b the Arrangement of units system of injection with preliminary preparation of gas mixture on 4 cylinder engine 1. Seat of the assistant 2. Emergency relay 3. Details of system of injection: Stream speed sensor Sensor of turn of the gate Switch хо


1O.22b Детали корпуса дроссельной заслонки (до 1989 г.)
1O.22b Details of the case of a butterfly valve (till 1989)


12.4а Для снятия корпуса отсоедините указанные тросы, шланги и разъемы...
12:4á For removal of the case disconnect the specified cables, hoses and sockets...


Installation
6. Installation is carried out upside-down. Check correctness of connection of all cables, hoses and sockets.
7. Start the engine and be convinced of lack of a leak of fuel about nozzles. Check idling turns. Warm up the engine and add liquid.

13.2 Прокладка и уплотнитель проводов форсунки 1.  Прокладка  2. Уплотнитель
13.2 Laying and sealant of wires of a nozzle 1. Laying 2. Sealant


13.4а Снятие форсунки 1. Оправка
13:4á Removal of a nozzle 1. Mandrel


12.4б ...и отверните 4 гайки
12:4í... also turn off 4 nuts



"previous page
7.11. Decompression of fuel system
following page"
7.13. Nozzle replacement