Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
13.1. Specifications
13.2. General information
13.3. The nave automatic interlock device - removal and installation
13.4. Half shafts - removal and installation
13.5. A half shaft - dismantling and assembly
13.6. A nave and a rotary fist - smyaty and installation
13.7. Nave epiploons – removal and installation, adjustment of bearings
13.8. The forward driveshaft - removal and installation
13.9. Epiploons of a forward reducer - replacement
13:10. A forward reducer - removal and installation
13:11. Epiploons of the transfer case - replacement
13:12. The transfer case - removal and installation
13:13. The transfer case - dismantling
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment



13.1. Specifications

Naves of forward wheels
Preliminary tightness of bearings
2,15-6,4 N of m.
Axial side play of a half shaft
0,1-0,3 mm
Thickness of adjusting washers of a half shaft
1,1-2,1 mm through 0,2 mm
Adjusting length of covers of a half shaft (mm)
internal hinge
Till 1990.
Since 1991.
External hinge
Till 1990.
Since 1991.
Amount of the lubricant put in the hinge
In the internal hinge

220 g
In the external hinge

160 g


no more than 0,6 mm
Axial side play

no more than 0,02 mm

1.1а Привод передних колес 1.Торсион 2. Верхняя шаровая опора 3. Ступица 4. Щит тормоза 5. Поворотный кулак Б. Нижняя опора 7. Полуось 8. Поперечина стабилизатора 9. Штанга 10. К передней части автомобиля 11. Нижний рычаг 12. Верхний рычаг 13. Амортизатор
1.1a Drive of forward wheels 1. Torsion 2. Top spherical support 3. Nave 4. Board of a brake 5. Rotary fist B. Lower support 7. Half shaft 8. Stabilizer 9 cross-piece. Bar 10. To a forward part of the car 11. Lower lever 12. Top lever 13. Shock-absorber

1.1б Вид снизу ходовой части автомобиля 4x4 1. Передний мост 2. Передний редуктор 3. Трансмиссия 4. Передний карданный вал 5. Раздаточная коробка 6. Задний карданный вал
1.1b Bottom view of a running gear of the car 4x4 1. Peredny Bridge 2. Forward reducer 3. Transmission 4. Forward driveshaft 5. Transfer case 6. Back driveshaft

Forward reducer
Preliminary tightness of bearings of the leading gear wheel of the main transfer (at the established epiploons)
The car with 4-cylinder engines
0,9-1,7 N of m.
The car with V6 engines
1,13-1,72 N of m.
Inhaling moments (N. of m)
Nave nut
Bolts of fastening of the gear coupling of a nave of a forward driving wheel
Bolts of fastening of the top spherical support to the suspension bracket lever
Nuts of fastening of the lower spherical support
Bolt of fastening of thirst of the lever for a rotary fist
Support finger
Fastening of an arm of a support to a rotary fist
Bolts of fastening of a half shaft to differential
Bolts of fastening of a flange of the cardan hinge to a reducer
Bolts of fastening of a flange of the cardan hinge to the transfer case
Nut of a forward reducer
The car with 4-cylinder engines
The car with V6 engines
Clamp cap
Nuts of a flange of the transfer case
Bolts of fastening of the transfer case to transmission
Nuts of wheels
Hl cm. 1

"previous page
13. A running gear of cars with a wheel formula 4x4
following page"
13.2. General information