Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Maintenance of the car
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of the cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Lubricant of a running gear and steering
2.16. Check of a suspension bracket and steering
2.17. Check of the driveshaft
2.18. Check of the exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in the manual transmission
2.21. Check of level of oil in the transfer case
2.22. Check of level of oil and karteredifferentsiat (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ejector valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Replacement of oil in the transfer case
2.36. Replacement of oil in the manual transmission
2.37. Replacement of oil in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Replacement of lubricant in naves of forward wheels and check of bearings (only for rear wheel drive cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and the runner of a rotor - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Cooling systems, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and elements of finishing
17. System of electric equipment



2.25. Check of fuel system

When working to follow fire safety regulations. Depressurization of the fuel highway of injector engines is allowed only after a system decompression (Hl. 4).

1. The fuel tank is mounted in a back part of a body.
2. It is the best of all to check fuel system when the car is raised by a telfer or installed on supports as some details of fuel system, for example the tank and a part of the fuel highway, are from the bottom.
3. The fuel system needs urgent check if during driving, or after the parking of the car under the sun the gasoline smell is felt.
4. Turn off a stopper of a jellied mouth of the fuel tank and check on it existence of traces of corrosion and damage of laying. On laying the accurate print of edge of a jellied mouth has to be observed. If necessary replace laying.
5. Check, being under the car, a condition of a tank and a mouth. Especially attentively examine connection of a mouth with a tank. Existence of punctures, cracks and mechanical damages is not allowed. Weakening of connection of a rubber pipe of a mouth or deterioration in a condition of rubber can sometimes be the cause of a leak. Such defects can be eliminated independently.

It is forbidden to repair the fuel tank independently.

24.16  Колесный цилиндр барабанных тормозов
24:16 Wheel cylinder of drum brakes

6. Carefully examine all rubber hoses and metal tubes departing from a tank. Check reliability of connections, existence on hoses of wear tracks, a perezhatiya and other damages. Carefully check a condition of tubes on all length. If necessary repair the damaged sites of the highway, or replace.
7. If the smell of gasoline remains, then check system of injection (Hl. 4).

"previous page
2.24. Check of brakes
following page"
2.26. Check of the thermostat of the air filter